Bender Stainless
Uncategorized June 26th. 2011, 9:57pmBender Stainless
US $18.95
Ercolina TB76 / TB60 Top Bender_SB48 Super Bender Rotary Draw Benders_Visit www.ercolina-usa.com
4 Color Printing Tower
The 4 color printing (perfecting) machinery is actually a common impression cylinder (CIC). It works in conjunction with 20 cylinder configured design. This design facilitates the color registration to remain the same during the entire period of unwind roll. The machine will let you experience the best of color printing technique. This is a revolutionary technique that has never been experienced before.
It consists of pin point registration on both sides of the web regardless of varying web tension and varying press speeds.
The accurately ground and hardened bearers work towards providing consistent reference surface for ideal accuracy of cylinder impression. Another important feature is the pin register system that is perfectly built into the plate bender. Thereafter it is carried via the pin register system built ideally into the plate lock-up. This pin register assures that upon installment, the plate should be in perfect position. Additionally, all plate cylinders are prepared with on the go side register as well as circumferential movement for ideal color registration.
Narrow gap blanket cylinder offers larger print area. The pneumatic control ensures perfect ease and speed of operations in conjunction with perfect plate punching as well as bending system. The combination guarantees highest precision in pre-press operations. The unit is modular in built. It also has continual possibilities of color units in the following configuration:
4+2, 4+1, 2+1, 1+2 etc
These are available to different requirements.
Here is a list of standard and special features of 4 color printing tower:
• Brush dampening system
• Motorized inking system
• Shields to facilitate brush dampening
• Pneumatic controls to offer ink, dampner and impression
• ON/OFF facility for pneumatic controls
• Pneumatic core shafts. This is an optional feature
• Pneumatic roll lifting
• Mechanical expandable core shaft
• Roll stand in conjunction with Pneumatic disc brakes
• Plate punch register system
• Efficient web break detectors
• Lever type ink keys
• Stainless steel cylinders
• Double ended plate bender
• Chilled water circulation system
• Auto paster. This is an optional feature
• Narrow gap blanket cylinder
With so many fantastic features the 4 color printing tower comes equipped with, there is no reason that your organization should stay away from accommodating the fantastic machine.
About the Author
Prakash webtech leading manufactures of Offset printing machines, Web offset printing machines, Newspaper web offset, Newspaper web press, Newspaper printing machines, Semi commercial press,Coldest web offset,4 High Tower Machine,4 color printing Tower and High quality web offset printing machine in India
Pipe bending for exhausts intakes manifolds and roll cages ???
I was wondering if there was any cheaper manual/hydraulic type benders out there that would give me decent bends with out the inside of the bend flattening out or wrinkling? I am hoping not to spend over a couple hundred bucks on a bender so obviously theres no way i could afford a mendrel bender or anything, but I would like to get info from anyone else that has or does bend pipes and knows of a way to make decent quality bends in a fairly cheap way. I do want to be able to bend up to a 3" pipe with different thicknesses using stainless and aluminum. I am guessing the thinner intake pipes I want to bend will have the most distortion when bending. I know even a mendrel has a very slight distortion, but in my case I just want to get the least amount of distortion in the bends at a reasonable price. So is there any ways of doing this? certain tools/benders I should look into? Any advise from someone that actually does pipe bending would be appreciated, thanks
Unless you have a computerized bender that can be programmed to bend a specific piece or length and gauge of pipe a specific way then it's all trial and error as you custom fit each piece.
A muffler shop with one of those higher priced benders can do it but it's time consuming and you'd have to piece it together. The sharper the bend the more likely there will be inside wrinkles.
They sell the old manual hand cranked benders. Might check at Harbor Freight Tools for a Made in China bender at a decent price.
Good Luck!
